How To Change Coil On Vape: A Step-by-Step Guide For Beginners

Before we get into how to change coil on vape, let's quickly understand what a vape coil actually is. It's the part that turns e-liquid into vapor. The coil sits inside the atomizer and connects to the battery. When you switch on your vape, the coil heats up and vaporizes the e-liquid, allowing you to inhale it. If your device has adjustable wattage, you can tweak the heat to get your preferred vapor output. 

Just remember, higher heat makes the coil burn out faster. That's why coils need regular maintenance, as they aren't designed to last forever.

So, now you know what a vape coil is and how it works. But now you might be wondering how do you know when to change coil on vape? Let's find out! 

• Burnt Taste: If your puff tastes burnt or harsh, it's clear that your coil is burnt out.

• Change In Flavor: When your e-liquid tastes weak, metallic, or spoiled, it's time to change your coil. 

• Weak Vapor Production: If you've been noticing getting smaller clouds than usual, it's a sign your coil might be clogged or worn out. 

• Gurgling or Leaking: An old coil can cause extra e-liquid to collect inside, resulting in leaks or gurgling sounds. If you've been hearing them, it's time to change the coil. 

• Dark or Burnt Coil Appearance: If you check and see that the coil is dark or burnt-looking, it's better to replace it immediately.

Next up! If you've decided to change your coil,  make sure you gather the right tools: 

• You need a fresh coil.

• A vape tank or pod.

• Some paper towels or tissues.

• And an e-liquid for priming the coil.

Here are some simple ways to change the coil on your vape pod. Take a look, especially if you are a beginner: 

• Step 1: Always ensure that your vape pod is turned off before changing the coil. 

• Step 2: Remove the tank from the battery of your device. 

• Step 3: If there's any e-liquid left, empty the juice to avoid spills. 

• Step 4: Unscrew the old coil from the bottom of the tank. Simply twist it counterclockwise and remove.

• Step 5: Before using the new coil, prime it by adding a few drops of e-liquid onto the cotton holes and center to let it soak. This helps prevent dry hits.

• Step 6: Place the new coil in its slot and screw it in clockwise until it's snug. By doing this, you have completed the installation of the new coil. 

• Step 7: Now it's time to put everything back together by reassembling the tank.

• Step 8:Refill your tank with an e-liquid and let it sit for about 5 to 10 minutes. It will ensure your coil has properly absorbed the liquid. 

Step 9: Lastly, switch on your vape and start low. Then slowly turn up the wattage to reach your preferred results. 

Take a quick look at the types of coils and understand which devices they are compatible with: 

Here are some additional tips and tricks for coil maintenance. Give them a read: 

• Ensure you are using the recommended wattage settings for your device. 

• Avoid chain vaping, as it can overheat your coil, cause dry hits, reduce the quality of your flavor, and waste e-liquid. 

• You should monitor your e-liquid levels to extend the lifespan of your coil, ensure smooth vapor production, prevent dry hits, and protect your battery.

• Select the optimal VG/PG ratio and verify coil compatibility to achieve a stronger flavor, sharper throat hit, and smoother overall performance. 

In the end, we'd say changing your vape coil isn't as daunting as it might seem. If you take care of key factors like wattage, e-liquid quality, and how often you vape, all of which affect coil longevity, you'll be in a good spot.

So, the next time you face a coil-related issue, we hope this guide helps. Now, get back to vaping and feel like a pro every time you face the need to change that coil!

If your vape still tastes burnt even after installing a new coil, it usually means the coil wasn't primed properly, or the wattage is too high, or you're vaping too soon after filling. To fix this, let the coil soak for 5–10 minutes, start at a lower wattage, and avoid chain vaping. 

Yes, you must prime your coil every time you install a new one.

No. An old coil should ideally not be reused. A new coil will give you a cleaner flavor, better vapor, and a smoother vaping experience.

Yes, a well-primed coil will last longer than one that hasn't been primed. It also prevents the cotton from burning during the first few puffs, which is a common cause of early coil damage.

You should wait for 5–10 minutes to let the coil soak the e-liquid. Start at a lower wattage, and avoid chain vaping for the best results. 

Disclaimer: This article is written purely for educational purposes. We do not promote the use of vapes or any related products. Consult your doctor before buying a vape.

• Do Vapes Expire? Everything You Should Know

• Vape Tricks Everyone Should Try

• Best Vape Juice Flavors To Try In 2025