How To Refill A Vape Pod: Everything You Need To Know

Vape pods, also known as pod vape systems, are modern vaping devices that consist of two parts: a pod and a battery. A pod refers to a plastic-made container that holds e-liquid & coil. A battery, as we are already aware, is the main component of the device responsible for powering the coil, allowing it to begin vaporizing the e-liquid. Such devices have become highly popular due to their user-friendly design, a cigarette-like experience, and low maintenance costs.

There are mainly two types of vape pods. Each type manages e-liquid differently. Have a look!

Open pod systems, as the name suggests, refer to pods that allow refilling and do not need to be discarded once they run out of pre-filled e-liquid. Anyone using such a device can add an e-liquid bottle of their choice. Their customizable nature makes them a highly preferred option for intermediate to advanced users.

These devices, unlike open pod systems, are designed for single use—until their pre-filled e-liquid is depleted. You need to buy an individual pod and attach it to continue vaping. Users who value maximum convenience and find the refilling process tedious usually prefer these pod systems.

Now that you know the types, let’s move to the main part—how to refill a pod vape. The process is simple; just follow these quick steps for a clean, mess-free refill.

1. Remove the pod from the device you are using. You should be aware that pods connect to a device via either a snap-fit (friction-fit) connection or a magnetic connection. Be gentle with the process; otherwise, the pod or main body can get damaged.

2. Once you are done, find the fill hole. Look for a small rubber or silicone plug on the side or bottom of the pod. Remove the plug to reveal the hole.

3. Now, insert the nozzle of your preferred e-liquid bottle into the fill hole and squeeze gently. Do not apply too much pressure; otherwise, liquid can spill and your vape will become sticky.

4. Fill the hole with extreme caution. Do not exceed 90% capacity and avoid allowing liquid to enter the central airflow tube.

5. Once the cartridge is full, seal it. Insert the rubber or silicone plug you removed in step two. Ensure it is tightly in place to avoid spillage and leaks.

6. Reattach or dock the pod back to the battery. You need to wait before vaping. Let the coil soak in the e-liquid fully; this process is known as "priming."

The answer is a mix. While it is technically possible to do so, it is not recommended. The entire process is taxing and requires extreme caution. On top of that, you would need various pieces of equipment if you are looking up "how to refill a disposable vape pod" online. Here are some more reasons why refilling is generally discouraged.

• Disposable vapes, such as the Foger Switch Pro Pod, Off-Stamp SW9000 Pod, and Digiflavor BRK, are sealed shut. Trying to open one may break seals or damage essential parts, rendering the device unusable.

• Because their e-liquid chambers aren't meant to be resealed, you often end up creating a mess plus wasting juice trying to do it yourself. Something else can even go wrong when reassembling things incorrectly.

• Even if you manage to refill the pod successfully, its battery will not last forever. Such batteries are designed either for limited charge cycles (if rechargeable) or for single-use, meaning they will eventually lose their charge and stop working.

• Tampering, especially with lithium-ion batteries, can pose risks. These batteries should be handled with utmost care.

For a refillable vape pod, you should top it up whenever the e-liquid level is low. How often this should be done depends on a lot of things— like your personal vaping routine or the kind of e-liquid you use.

Here are some signs signaling that your pod needs more juice:

1. You notice that there is hardly any e-liquid left.

2. The flavor or vapor is not as strong as it used to be. This could mean either that the e-liquid is nearly finished or that the coil needs changing because it’s getting old.

3. You experience a burnt taste (dry hit). This happens when the wick is so dry that the coil just ends up burning its cotton. If you get this taste, refill straightaway; also, think about changing the coil/pod. For pods, you can always check out the collection at Durity Distribution.

Read more: How To Fix A Burnt Vape Tips?

4. Gurgling sounds. Sometimes, when a coil is close to finishing its life, you will hear gurgling sounds as you take a hit. This problem indicates replacement is due.

Read more:How To Fix A Burnt Coil Without Replacing It: Quick Hacks.

Consider waiting 5 to 10 minutes after filling before vaping. This pause helps the coil soak up e-liquid. If you don't wait, there is a danger of dry hits– in other words, getting a burnt taste because your cotton wick isn't saturated. 

In the case of a new coil or a replaced one, an additional delay may be worthwhile – try waiting 10 to 15 minutes this time. This priming process ensures that from the very first inhalation, you'll enjoy smooth vapor full of flavor!

Refilling a vape pod is pretty easy, provided you're cautious. Knowing the right type, following all the steps, and refilling at appropriate intervals will give you consistent, flavorful hits. Though you can't refill disposable pods, buying a refillable one is both convenient and gives you more control. 

Remember to treat your device gently, let the coil prime, and avoid overfilling e-liquid.

By following these tips as well as the other ones mentioned, you ensure each puff stays satisfying, your pod lasts much longer, and vaping becomes a hassle-free experience.

Refilling a glass vape pod is a simple process, provided your specific pod model is designed to be refillable. To do so, take off the pod, find the fill hole, and put in your e-liquid until it's about 90% full. Then, close the plug and reattach the pod to the battery.

Not all e-liquids are suitable for every pod. High-VG liquids can be too thick for some coils, while certain flavors may clog the wick more quickly. Always check your pod’s compatibility.

To remove any leftover grime or flavors from previous e-liquids (which can affect the taste and clog the coil), rinse the pod (avoiding the coil) with warm water, then allow it to dry.

Yes. Putting too much e-liquid can lead to leaking, gurgling, or poor vapor production. Always add only enough liquid for the wick to soak properly.

Most pods that leak afterward are either overfilled or have a broken coil or seal. There's also the issue of e-liquid viscosity. Be sure to leave an air gap when filling yours; check the coil is correctly positioned, and always use e-liquid that is compatible with your device.

It's due to the coil's wick being scorched and therefore damaged beyond use. Typically, this occurs because the coil was dry-fired or has simply reached the end of its life. Refilling won't solve the problem; you must replace either the whole pod or just its coil.