Lost Mary Not Charging? Here’s How to Fix It Fast

Your Lost Mary vape's charging light does more than just look cool and glow – it shows what’s going on. Each color or pattern signals something about its charging status. Here’s what they typically mean:

Usually, most Lost Mary rechargeables need about 30 minutes to two hours to reach full capacity. This is when using the standard 5V/1A USB-C cable—though exact times do vary.

They depend on which model you have and what power source it’s connected to. Here is an approximate guide for a few favorites:

• Lost Mary MO20000 (800 mAh) → Approximately 45-50 minutes, occasionally as little as 30 minutes.

• Lost Mary MT15000 Turbo (600 mAh) → Around half an hour to an hour.

• Lost Mary MT35000 Turbo (1000 mAh) → Roughly 90 minutes (one and a half hours).

Avoid fast chargers and unplug once full to protect battery life. 

For more official guidance on handling vape batteries, you can refer to the FDA tips to avoid vape battery fires or explosions.

Lost Mary not charging? Wondering what went wrong? Don’t worry — most of the time, underlying issues are fixable. Maybe it’s something simple like a loose connection or dirt in the port. Let’s look at some common reasons your device might not turn on when you need it to.

One of the most common reasons behind a Lost Mary not charging is a faulty cable. If your USB-C cable is frayed, bent, or internally damaged, it may not deliver power correctly. Try switching to a different cable or adapter before assuming there’s something wrong with the vape itself.

Still no joy after trying different cables? Then maybe the battery is at fault. Rechargeable models such as the Lost Mary MT15000 Turbo can only go through a set number of charge cycles– and once they hit that limit, they sometimes hold no charge at all.

A port clogged with dirt can stop charging from working altogether. Pocket lint, dust, or sticky grime might get in the way, interrupting the charging process.

Occasionally, it isn’t really the vape— the problem lies with the plug. When utilizing a weak or erratic power source, your device may simply refuse to charge.

Lost Mary not charging even after switching cables and outlets? It might be due to the charger type. Avoid using high-speed or high-voltage chargers, as they may not be compatible. Stick with a standard USB-C charger for safe, consistent power flow.

In some cases, a damaged mesh coil can interfere with your vape’s charging mechanism. If you’ve ruled out every other issue, replacing the coil might be the final fix that gets your Lost Mary charging again.

Here’s how you can troubleshoot each possible cause step by step.

Initially, you must check the basics. This means making sure that the cable, port, and power source are all properly working to begin with.

After that, start off by using a dry brush or cotton swab to clean out any lint or dust that might have accumulated inside the charging port, as this can interfere with connections; then take a look at your USB-C cable.

Look closely for bends, frayed areas, or connectors that seem loose— if you see signs of damage like these, bear in mind a faulty cable could be stopping electricity from flowing correctly. Why not test with a different cable known to function well?

If the cable appears to be alright, try another power source. Maybe plug your vape into a different outlet or use a laptop USB port instead of a quick charger. Sometimes high-output adapters might deliver too much voltage; thus, using a regular 5V/1A charger can be considered safer in general.

When completely dead, the battery may take a while to respond. Allow it approximately 30–45 minutes of charging time before checking for indicators, such as lights or display messages. While charging, refrain from using the device. Moreover, remove the plug upon seeing a full battery light to avoid excessive charging!

Should all attempts fail, the issue is likely internal—possibly a worn-out battery or a malfunctioning coil. Regrettably, such problems are not repairable at home; perhaps replacing the coil or acquiring a new vape would be better options.

The following section will recommend a one-stop solution for all your vape needs, whether from the brand Lost Mary itself or if you wish to try another.

Well, if your Lost Mary still refuses to charge after all that effort — that’s just bad luck. Looks like it’s time to ask your wallet for a small favor and grab a new device. After all, when a vape’s done, it’s done.

Earlier, we mentioned a one-stop solution for all your vape needs — and here it is: Durity Distribution. We offer a vast selection of vapes. If you’re a long-time Lost Mary fan, you’ll find all the popular models in stock and ready to go.

And if charging issues seem to follow you around, consider buying in bulk instead of just one or two. With our low MOQ and unbeatable pricing, it’s the smarter, more economical choice. Place an order today!

To wrap it up, “Lost Mary not charging” issues are usually easy to fix once you know where to look. Often, the issue is something simple - maybe dirt has gotten into the port or the cable is faulty. But when you have tried everything and it still does not work well, then your vape has just given its final puff.

Perhaps it is time to treat yourself to a new one from Durity Distribution? After all, by reading this, you now know exactly how to spot, understand, and fix any problems with charging, so your next Lost Mary will be ready whenever you are!

If your Lost Mary is refusing to charge, there could be several reasons behind this problem, such as a faulty USB-C cable/power adapter, maybe dirt has gotten into the connection points, or perhaps the connection isn't quite tight enough.

It's also worth checking for any debris and making sure that you use a standard 5V/1A charger.

It takes between half an hour and two hours for most Lost Mary devices to fully charge, although the precise length of time will depend on both the battery capacity of the particular model being used and the power source.

It might be out of e-liquid or have a dead battery. Sometimes, airflow sensors or coils get blocked, too. A burnt coil, a pod connection that's not quite right, or problems with the device itself can also cause issues.

Read more:How To Fix A Burnt Coil Without Replacing It: Quick Hacks

There are some warning signs. The battery may fail to hold a charge fully, overheat while being used or charged, look swollen, or shut down unexpectedly, even though there is power.